Home
of the world's quickest and fastest automatic transmissions. Custom built and extensively
modified to be highly competitive add extremely durable. Dyno tested and race track proven
transmissions and components.
Catalog Page Four
COMPONENTS
Mike's Transmission Catalog
COMPONENTS
ADAPTER PLATES
| MT 3880 |
GM trans. to Chevy engine |
$ 224.98 |
$ 199.98 |
| MT 3881 |
Chevy trans. to GM engine |
$ 224.98 |
$ 199.98 |
| MT 3882 |
Chevy to 318,340,360 Chry. |
$ 495.50 |
$ 469.50 |
| MT 3883 |
Chevy to 383,426,440 Chry. |
$ 495.50 |
$ 469.50 |
| MT 3884 |
Chevy to 392 Hemi. |
$ 695. 50 |
$ 629.50 |
| MT 3885 |
Chevy to 289,302,351 Ford |
$ 639.50 |
$ 541.50 |
| MT 3886 |
Chevy to 351M,400M,427,460 Ford |
$ 639.50 |
$ 541.50 |
| MT 3887 |
Chevy to 332,352,360,390,427,428 Ford |
$ 889.50 |
$ 750.00 |
If ordering for Chrysler specify 6 or 8 bolt crankshaft.
FLEXPLATE SHIELDS (No Picture)
(S.F.I APPROVED)
Lightweight aluminum, designed for safety. Includes all
mounting hardware, easy to install!
| MT 3875 |
Flexplate Shield (S.F.I Approved) |
$ 75.98 |
$ 60. 00 |
TRANSMISSION SHIELDS
(S.F.I. APPROVED)
Lightweight, molded shield designed for applications that have minimal
clearance.
| MT 3876 |
Powerglide |
$ 113.50 |
$ 83.00 |
| MT 3877 |
Turbo 350 |
$ 175.98 |
$ 146.98 |
| MT 3878 |
Turbo 400 |
$ 135.98 |
$ 114.98 |
FLEXPLATES (No Picture)
(S.F.I. APPROVED)
Extra thick, anodized steel, flexplates .035 thicker than stock.
| MT 3992 |
Chevy internal balance. |
$ 118.95 |
$ 98.00 |
| MT 3993 |
Chevy 400 external balance |
$ 118.95 |
$ 98.00 |
| MT 3994 |
Chevy 454 external balance |
$ 118.95 |
$ 98.00 |
| MT 3995 |
Chevy 153 small tooth pattern |
$ 118.95 |
$ 98.00 |
FLYWHEELS
(SFI APPROVED)
| MT 4019 |
Billet steel automatic flywheel (Chevy) |
$ 540.50 |
$ 450.00 |
DEEP ALUMINUM PAN KIT
Deep aluminum pan with extra fluid capacity. Includes pickup
and bolts. Easy to install!
| MT 315 |
Powerglide |
$ 112.98 |
$ 98.50 |
| MT 316 |
Turbo 350 |
$ 145.98 |
$ 129.98 |
| MT 317 |
Turbo 400 |
$ 125.98 |
$ 119.98 |
| MT 314 |
C-4 Pan |
$ 125.50 |
$ 109.98 |
TRANSMISSION COOLERS (No Picture)
Will extend the life of your transmission and torque converter.
Lowers fluid temperatures
for any application. Highly recommended for R.V. and race applications.
| MT 19L |
19,000 GVW |
$ 113.50 |
$ 88.50 |
| MT 25M |
24,500 GVW |
$ 133.50 |
$108.50 |
| MT 29H |
29,000 GVW |
$ 153.50 |
$128.50 |
These transmission coolers all have pipe
fittings and are far
superior to anything else on the market.
TEMPERATURE GAUGES (No Picture)
Highly recommended for all R.V. and race applications where high
fluid temperatures can cause premature transmission or torque converter failure.
| MT 80212 |
Temp Gauge |
$ 59.98 |
$ 49.95 |
Includes all hardware needed to install gauge.
TRANSMISSION MOUNT (No picture)
Controls high horsepower /torque. Long lasting polyurethane transmission
mount impervious to corrosive under car fluids. Universal
mounting fits two bolt and single stud applications.
|
LIST |
RACER
NET |
| MT 332 Polyurethane transmission mount |
$ 39.95 |
$34.95 |
INPUT SHAFTS VASCO
Absolutely the strongest input shaft on the market today!
Vasco 300 material with large
turbo spline only.
| MT 7495 |
Turbo spline only |
$ 498.50 |
$ 450.00 |
INPUT SHAFTS HIGH TUFF
High tuff input shafts are made of 4340 steel billet and have a
Rockwell hardness of 42. These
shafts will withstand severe torsional shock without breaking. Shafts are available
with
powerglide or turbo spline.
| MT 7497 |
Powerglide 1.76/ 1.82 low gear |
$ 149.50 |
$ 129.99 |
| MT 7496 |
Powerglide 1.76/ 1.82 low gear turbo spline* |
$ 149.50 |
$ 129.99 |
|
|
|
|
| *Installation for the input shaft
requires some minor machining of the stator support. |
| MT 7491 |
Turbo 400 billet input shaft |
$ 395.00 |
$ 350.00 |
300M INPUT SHAFT
Strong shaft made of 300M material. This shaft can withstand severe
torsional shock without breaking.
|
LIST |
RACER
NET |
| MT 7492 Turbo spline |
$ 295.00 |
$ 260.00 |
POWERGLIDE CASES
| MT 326 |
Powerglide proprepped case |
$ 149.00 |
$ 119.50 |
| PG 1000L |
PG Reid case/w liner |
$1055.00 |
$ 925.00 |
| MT 330 |
Long aftermarket roller ext. housing |
$ 219.00 |
$ 189.50 |
| MT 331 |
Shorty aftermarket roller ext. housing |
$ 195.00 |
$ 152.00 |
POWERGLIDE SHORTY KIT (No Picture)
Shortens a powerglide transmission for applications requiring a
shorter than stock
transmission length. Standard shorty kit comes in 1.76 or 1.82 gear ratio,
includes
short planet carrier, ring gear, sun gear and aluminum shorty extension housing.
| MT 746 |
1.76 gear ratio with cover |
$ 549.50 |
$ 449.50 |
| MT747 |
1.82 gear ratio with cover |
$ 549.50 |
$ 449.50 |
SUPER SET PLANETARIES
Very strong powerglide planetary. Planet carrier with billet
4340 output shaft, 1.76 ratio
heat treated gear set, ring gear, sun gear.
| MT 748 |
Short shaft planetary with aluminum
extension housing w/ OEM gears |
$ 895.00 |
$ 695.00 |
| MT 750 |
Long shaft planetary w/ OEM gears |
$ 895.00 |
$ 695.00 |
Exceptionally strong powerglide planetary. Planet
carrier with billet vasco output shaft, 1.76 ratio
billet gear set, ring gear, sun gear.
| MT 751 |
Short shaft planetary with aluminum
extension housing 9310 billet gears |
$1350.00 |
$1249.50 |
| MT 752 |
Long shaft planetary 9310 billet gears |
$1350.00 |
$1249.50 |
| MT 743 |
1.80 straight cut gear set in a billet carrier |
$1350.00 |
$1295.00 |
| MT 754 |
Billet 9310 1.76 (gear set only) |
$1019.50 |
$ 895.00 |
| MT 755 |
Pin kit |
$ 129.00 |
$ 109.00 |
LOW RATIO GEAR SETS
Gives a lower first and second gear but retains 1:1 high gear.
This increased torque results in
quicker launches and more responsive acceleration but does not hurt top end performance.
| MT 2775 |
400TH 2.75 Low Gear |
$ 695.00 |
$ 595.00 |
| MT 2776 |
*400TH 3.00 Low Gear 1.57 Second |
$1098.00 |
$ 995.00 |
| MT 3275 |
350TH 2.75 Low Gear 1.52 Second |
$ 765.00 |
$ 667.00 |
| MT 4275 |
C-6 2.77 Low Gear 1.54 Second |
$ 779.00 |
$ 679.00 |
| MT 7423 |
PG 1.96 9310 gears/4340 shaft/ forged ring gear |
$1450.00 |
$1295.00 |
| MT 7424 |
PG 1.96 9310 gears w/OEM carrier& ring gear |
$ 995.00 |
$ 850.00 |
*Special H.D. pinion planet assembly 21%
lower 1st 11% lower 2nd!
*Also available in higher ratios for TH400, call for details.
THESE PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE!
MIKE'S TRANSMISSIONS & COMPONENTS
(661) 723-0081 FAX (661) 723-1521
 
|
