POWERGLIDE TRANSMISSION PARTS
Mike's transmission uses only high quality components. We test our
new products on our own test vehicles so that our customers know that
they are getting a truly reliable product.

_______________________________________

POWERGLIDE CASES
OEM Powerglide case ( clean pull outs)
MT 28167 - OEM Powerglide case.........$95.00
or 3 for $250.00

OEM Powerglide case trimmed for shield clearance.
Painted and ready to build

MT 28100 - Powerglide proprepped case.........$149.95 or 3 for $400.00

SFI approved aluminum powerglide case that requires no external shields! High
quality aluminum casting thicker in key areas,CNC machined for direct replacement of
OEM case. A must for high power applications!
PG 1000L - Powerglide Reid case with liner...........$995.00
PG 1000RL Powerglide Reid case with roller bearing .........$1045.00


PG 2000 - Reid 1/2 case........................$860.00
Reid bellhousings for 1/2 case
Chevy bellhousing SFI certified...........$360.00
BPO bellhousing SFI Certified..............$360.00
Small block Ford bellhousing aftermarket - 164 tooth - SFI....$360.00
Big block Ford & Chrysler available soon!


EXTENSION HOUSINGS
MT 28101 - Long aftermarket roller extension housing.....$189.50
( MT 28101 needs to have yoke MT PGYMW for proper installation)
MT 28102 - OEM PG extension housing with new
teflon bushing & seal......$39.95
MT 28103 - Shorty aftermarket roller cover...........$179.00
MT 28104 - Shorty cover with teflon bushing and seal.........$169.00

POWERGLIDE DRIVESHAFT YOKES
MT PG28135- Billet yoke with 1.498 diameter for use with
Reid roller extension housing............$249.95
MT PG28105 - Billet yoke with 1.5 diameter for standard
bushing extension housing...........$249.95


POWERGLIDE INPUT SHAFTS

PG input shafts
HIGH TUFF SHAFTS
High tuff input shafts are made of 4340 steel billet. These shafts will withstand
severe torsional shock without breaking. Shafts are available with powerglide or
turbo spline.These shafts are good up to approximately 900 hp.
MT 28106 - Powerglide 1.76/1.82 unishaft turbo spline......$149.95
MT 28107 - Powerglide 1.76/1.82 unishaft PG spline......$149.95


300M INPUT SHAFTS
Strong shaft made of 300M material. This shaft can withstand severe torsional shock
without breaking. These shafts are good up to approximately 1100 hp.
MT 28108 - PG spline...........$260.00
MT 28109 - Turbo spline.........$260.00


VASCO INPUT SHAFTS
Absolutely the strongest standard size input shaft on the market today!
Vasco 300M material with special heat treat.
MT 28110 - Turbo spline only no holes in front ringed up to approx 1300 hp.......$459.00
MT 28169 - Turbo spline ringless vasco shaft up to approx. 1600 hp.........$495.00


MONSTER SHAFT
1.060 Diameter vasco input shaft with turbo spline. It's .100
larger than other shafts. (Requires other components for proper installation.
Call for more information).
MT 28111 - Monster input shaft........$495.00


POWERGLIDE PUMPS
G-ROTOR PUMP


PG pump

Highly modified g-rotor pump with solid steel stator tube.
MT 28112 - G-Rotor pump.......$695.00


PG pump

PROGLIDE PUMP
This powerglide pump is designed to improve your transmission
lube system. It features special drilled passages, heat treated stator tube, forged
steel gears, comes with or without turbo bushing.
MT 28113 - Proglide pump kit.......$349.00


PROGLIDE DRUM KIT
This drum kit features a special machined drum to accept a roller
bearing, machined piston, accepts extra clutches and steels,
heavy duty wide steel clutch hub.




MT 28114 - Drum kit with 6 standard clutches and steels........$189.95
MT 28115 - Lightweight drum kit with 6 standard clutches and lightweight drum
(1/2 the weight of stock drum kit)....$389.95




MT 28116 - Drum kit roller bearing with 8 clutches and steels....$249.50
MT 28117 - Lightweight drum kit with 8 standard clutches and lightweight drum
(1/2 the weight of stock drum kit)....$449.50




MT 28118 - Drum kit with 10 clutches - New drum with
wide steel hub and 10 Powerglide clutches & steels..........$450.00




MT 28119 - Monster glide drum kit - Specially machined drum for
10 large hipo clutches and steels 20% more surface area than standard
10 clutch drum(also requires large flange plate)....$495.00

POWERGLIDE VALVE BODIES



We carry the best valve bodies on the market and the quickest transbrakes available.
MT 28120 - Powerglide high pressure manual valve body......$189.98
MT 28121 - PG Protree transbrake valve body......................$349.50
MT 28122 - Protree transbrake valve body gasket only...........$15.95
MT28123 - Transbrake button............................................$19.95
MT 28142 - Powerglide protree transbrake solenoid................$98.50

PRESSURE REGULATOR SPRINGS
225 Pound powerglide pressure regulator spring, used to tune
up your own valve body.
MT 28124 - Pressure regulator spring.............$15.99


PLANETARIES


POWERGLIDE OEM PLANETARIES
Rebuilt OEM Powerglide planetaries.
MT 28176 - 1.76 OEM rebuilt planetary.............$249.50 or 3 for $595.00
MT 28168 - 1.82 OEM rebuilt planetary...............$185.00

POWERGLIDE SHORTY PLANETARIES
Shortens a powerglide transmission for applications requiring a shorter than stock
transmission length.Standard shorty kit comes in 1.76 or 1.82 gear ratio.
Includes short 18" planet carrier, ring gear and sun gear.
MT 28125 - 1.76 Standard material.............$395.00
MT 28126 - 1.82 Standard material..............$395.00


SUPER SET PLANETARIES
Very strong powerglide planetary. Planet carrier with 4340 billet output shaft, 1.76 ratio
heat treated gear set, ring gear, sun gear. These gears are not recommended for over 800 hp.
MT 28127 - Short shaft billet planetary with OEM 1.76 gears.......$695.00
MT 28128 - Long billet shaft planetary with OEM 1.76 gears........$695.00


1.80 SUPER PLANETARIES
Exceptionally strong powerglide planetary. Planet carrier with 4340 billet output shaft,
1.80 ratio straight cut billet gear set, ring gear & sun gear with aftermarket flange.
MT 28129 - Short shaft planetary with billet 1.80 gear set......$1249.50
MT 28130 - Long shaft planetary with billet 1.80 gear set......$1249.50


MONSTER GLIDE PLANETARIES
Custom planetary made for 20 spline input shaft. 1.78 ratio large straight cut gears. Bolt in pins and 300M material output shaft carrier. This gear set will only fit a Mike's monster glide transmission.
MT 28131 - Short shaft planetary with monster gears......$2195.00
MT 28132 - Long shaft planetary with monster gears......$2195.00


THESE ARE SOME OF OUR MORE POPULAR PLANETARIES BUT WE CAN CUSTOM BUILD A PLANETARY FOR YOUR SPECIFIC APPLICATION!! WE HAVE MANY RATIOS AVAILABLE!!

Parts pages : 1 - 2

_______________________________________

IF WHAT YOU ARE LOOKING FOR IS NOT LISTED HERE
PLEASE CALL US FOR AVAILABILITY!!

(661) 723-0081
FAX (661) 723-1521

ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE!!